采空区瓦斯涌出源位置对瓦斯分布影响的数值模拟

根据多孔介质渗流理论,利用Fluent软件,分别对采空区瓦斯在整个采空区均匀涌出、上邻近层及底板遗煤涌出2种情况下采空区瓦斯分布规律进行了数值模拟.结果表明:采空区瓦斯为上邻近层及底板遗煤处涌出时,沿走向方向,靠近上邻近层及底板处高体积分数瓦斯距离工作面较近;沿竖直方向,瓦斯体积分数分布呈钩状,靠近瓦斯涌出源处瓦斯体积分数最高;整个采空区均匀涌出时采空区瓦斯体积分数分布与上邻近层及底板遗煤涌出时有很大差别.因此,为了得到更符合实际情况的瓦斯分布规律,数值模拟时应按照现场实际的瓦斯涌出源位置建立模型.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.     

Predicted no-effect concentrations for mercury species and ecological risk assessment for mercury pollution in aquatic environment

Mercury(Hg) exists in different chemical forms presenting varied toxic potentials. It is necessary to explore an ecological risk assessment method for different mercury species in aquatic environment. The predicted no-effect concentrations(PNECs) for Hg(Ⅱ) and methyl mercury(Me Hg) in the aqueous phase, calculated using the species sensitivity distribution method and the assessment factor method, were 0.39 and 6.5 × 10-3μg/L, respectively. The partition theory of Hg between sediment and aqueous phases was considered, along with PNECs for the aqueous phase to conduct an ecological risk assessment for Hg in the sediment phase. Two case studies, one in China and one in the Western Black Sea, were conducted using these PNECs. The toxicity of mercury is heavily dependent on their forms,and their potential ecological risk should be respectively evaluated on the basis of mercury species.     

Prediction of effluent concentration in a wastewater treatment plant using machine learning models

Of growing amount of food waste, the integrated food waste and waste water treatment was regarded as one of the efficient modeling method. However, the load of food waste to the conventional waste treatment process might lead to the high concentration of total nitrogen(T-N) impact on the effluent water quality. The objective of this study is to establish two machine learning models—artificial neural networks(ANNs) and support vector machines(SVMs), in order to predict 1-day interval T-N concentration of effluent from a wastewater treatment plant in Ulsan, Korea. Daily water quality data and meteorological data were used and the performance of both models was evaluated in terms of the coefficient of determination(R~2), Nash–Sutcliff efficiency(NSE), relative efficiency criteria(d rel). Additionally, Latin-Hypercube one-factor-at-a-time(LH-OAT) and a pattern search algorithm were applied to sensitivity analysis and model parameter optimization, respectively. Results showed that both models could be effectively applied to the 1-day interval prediction of T-N concentration of effluent. SVM model showed a higher prediction accuracy in the training stage and similar result in the validation stage.However, the sensitivity analysis demonstrated that the ANN model was a superior model for 1-day interval T-N concentration prediction in terms of the cause-and-effect relationship between T-N concentration and modeling input values to integrated food waste and waste water treatment. This study suggested the efficient and robust nonlinear time-series modeling method for an early prediction of the water quality of integrated food waste and waste water treatment process.     

呼吸效应对矿井封闭火区氧浓度的影响分析

为避免因火区封闭导致重大安全事故发生，通过采集某矿井1 d内3个不同监测点的大气压力变化情况，建立大气压力波动模型并分析计算，同时建立火区内外压差100，750 Pa情形下的氧浓度模型进而获得火区内侧氧气浓度因呼吸效应，在不同压差、体积大小火区、风阻、瓦斯涌出量、封闭时刻等多因素耦合影响下随时间的变化规律，以评估火区危险性。研究结果表明:井下大气随地面大气周期波动，封闭火区内、外侧之间的气压差因外界大气波动呈现16 h的余弦波动和8 h的线性波动周期变化；密闭质量好的火区具有更好地抗干扰性，内侧氧浓度的降低主要依靠瓦斯稀释；密闭质量差的火区，内侧氧浓度易受到火区涌出瓦斯、外界涌入大气双重影响；火区氧浓度在2%~12%之间波动，以至火区存在发生瓦斯爆炸的可能性；火区内外压差较大时，氧浓度波动变化幅度更大，危险作用持续时间更长。结合火区氧浓度波动模型，可有效地对矿井火区采取安全的防范措施，避免瓦斯爆炸事故发生。     

Experimental research of LNG accidental underwater release and combustion behavior

Evaluating potential hazards caused by accidental LNG release from underwater pipelines or vessels is a significant consideration in marine transportation safety. The aim of this study was to capture the dynamic behavior of LNG jet released under water and to analyze its vapor dispersion characteristics and combustion characteristics on the water surface during different release scenarios. Controlled experiments were conducted where LNG was jet released from a cryogenic storage tank. The dynamic process of LNG being jet released from orifices of different sizes and shapes, as well as the rising plume structure, were captured by a high-speed camera. The leakage flow rate and pipeline pressure were recorded by a flow meter and pressure gauge, respectively. The concentration distribution that emanated from the water surface was measured utilizing methane sensors in different positions with various wind speeds. The flame combustion characteristics of LNG vapor clouds, which immediately ignited upon the enclosed water tank, were also recorded. Additionally, the mass burning rate of the flame on the water surface was evaluated, and a new correlation between the ratio of flame length and width was established. The results indicated a large dimensionless heat release rate (Q*) and a continuous release flow rate in a limited burning area. This study could provide greater understanding of the mechanisms of LNG release and combustion behavior under water.     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

受限空间内惰性气体对CH4爆炸抑制特性研究

N2和CO2是常用的惰性抑爆气体,为研究两种气体的抑爆特性,采用20L球形爆炸试验装置,分析了不同浓度配比条件下N2/CH4/空气以及CO2/CH4/空气混合气体的爆炸压力,同时采集爆炸后的气体样品,对比分析爆炸后残留气体的主要成分。结果显示:随CH4浓度从5%增加至12.5%时,完全抑制CH4爆炸需要的惰性气体最小量先增大后降低,CH4浓度在6.5%~7.5%之间时,抑爆需要的惰性气体的量最大;在同一CH4浓度条件下,抑爆需要N2的量大于CO2,并且CH4浓度在5%~6.5%时,抑爆需要两种惰性气体的量值差别最大;当CH4浓度一定时,随着加入惰性气体量的增大,爆炸最大超压逐渐降低,惰性气体浓度和爆炸超压之间基本呈线性关系;在同样条件下,相对于N2,CO2为抑爆气体时,爆炸后腔体内残留的CH4浓度较高。研究成果为惰性气体抑爆技术提供技术支撑,同时为揭示惰性气体抑爆机理有一定作用。     

燃煤机组烟囱在线烟尘仪监测烟尘浓度偏高原因分析及对策

除尘电价补贴政策的出台以及新环保标准的实施，一方面提高了电厂降低烟尘排放浓度的积极性，另一方面对烟尘在线监测系统提出了更高的要求。针对一些采用湿法脱硫和无GGH的燃煤机组，会出现烟囱在线烟尘仪监测的烟尘浓度高于电除尘器出口烟尘的浓度，对产生这一现象的原因进行了分析并提出相应的解决对策。